Share this post on:

I-c-Myc tag gel (MBL) in a column for 1 h at 48C (cohesin) in a final volume of 10 ml on a rotary wheel. Beads were washed three times with wash buffer (50 mM HEPES, 0.5 NP-40, 0.25 M NaCl) on a rotary wheel for 5 min at 48C and the proteins were eluted either twice in 600 ml of wash buffer containing 4 mM biotin (SMC2/SMC4 and condensin) or five times with 200 ml of c-Myc tag peptide (0.1 mg ml21) in wash buffer (cohesin) on a rotary wheel for 30 min at 48C. The eluents were analysed by SDS AGE and by immunoblotting.Open Biol. 5:6.5. Sample preparation for mass spectrometry analysisBands containing the cross-linked complexes were excised from gels and in-gel digested following standard protocols. The cross-linked peptides were extracted from gel slices, acidified to pH 3.0 with 0.5 acetic acid and fractionated using the SCX-StageTip [51]. High salt fractions were diluted four-fold with 0.1 TFA and desalted using C18-StageTips [89] before MS analysis.6.2. Cross-linking of SMC2/SMC4, condensin and cohesin complexesThe mixing ratio of BS3 to complexes (SMC2/SMC4, condensin, cohesin) was determined by using 1 mg protein aliquots and a 30-, 90-, 270-, 810- or 5-, 15-, 30-, 60-, 120- or 3-, 30-, 90fold weight excess (respectively) of BS3 cross-linker (Thermo Scientific) resuspended in DMSO at 300 mg ml21. After 2 h, the reaction was quenched by addition of ABC to 50 mM for 30 min. The products of cross-linking were separated on a NuPAGE 4?2 bis ris gel (buy Larotrectinib Invitrogen) using MES running buffer and were Coomassie- or silver-stained. Either 36 mg of purified SMC2/SMC4 or 100 mg of condensin complex, at 0.05 mg ml21 in 50 mM HEPES buffer, 250 mM NaCl, 0.5 NP-40, 4 mM biotin, was cross-linked with 30-fold weight excess of BS3 for 2 h on ice. After 30 min quenching, the cross-linked complexes were separated in 4?2 bis ris gel (Invitrogen). Also 100 mg of cohesin complex at 0.02 mg ml21 was cross-linked in the same way.6.6. Mass spectrometryCross-linked peptides were analysed on LTQ-Orbitrap Velos (Thermo Scientific) on a 180 min or 240 min gradient, using CID collision energy at 35 and fragmenting the eight most intense peptide precursor ions with charge stages z ?3 or higher, per cycle. MS spectra were recorded at 100 000 resolution, and MS/MS spectra at 7500 resolution, both in the Orbitrap. When analysing scaffold samples, an inclusion list stating the m/z values of condensin and cohesin cross-linked peptides identified in the in vitro study was used to dictate the MS/MS analysis. First, the ions from the inclusion list were fragmented, and only if these were not detected were other peptides of z . 2 fragmented using dynamic exclusion.6.7. Database searchingThe MS/MS spectra peak lists were generated from the raw data files using the Quant module of MAXQUANT v. 1.0.11.2 [90] at default parameters, except for choosing 200 as `top MS/MS peaks per 100 Da’. Cross-linked peptide spectra were (��)-BGB-3111MedChemExpress (��)-Zanubrutinib searched using the software package Xi (ERI, Edinburgh) against Gallus gallus condensin and cohesin sequences uploaded from SwissProt or from the chicken IPI database (v. 3.49) modified as described for analysis of chicken mitotic chromosomal proteins [59]. Search parameters: MS tolerance 6 ppm, MS/MS tolerance 20 ppm, fixed modification carbamidomethyl on cysteine, variable modifications: oxidation (Met), DST/BS3OH (Lys), DST/BS3-NH2 (Lys), the `Max. missed cleavages’ was set to 4. Matched spectra and cross-linked peptide candidates were returned by Xi in.I-c-Myc tag gel (MBL) in a column for 1 h at 48C (cohesin) in a final volume of 10 ml on a rotary wheel. Beads were washed three times with wash buffer (50 mM HEPES, 0.5 NP-40, 0.25 M NaCl) on a rotary wheel for 5 min at 48C and the proteins were eluted either twice in 600 ml of wash buffer containing 4 mM biotin (SMC2/SMC4 and condensin) or five times with 200 ml of c-Myc tag peptide (0.1 mg ml21) in wash buffer (cohesin) on a rotary wheel for 30 min at 48C. The eluents were analysed by SDS AGE and by immunoblotting.Open Biol. 5:6.5. Sample preparation for mass spectrometry analysisBands containing the cross-linked complexes were excised from gels and in-gel digested following standard protocols. The cross-linked peptides were extracted from gel slices, acidified to pH 3.0 with 0.5 acetic acid and fractionated using the SCX-StageTip [51]. High salt fractions were diluted four-fold with 0.1 TFA and desalted using C18-StageTips [89] before MS analysis.6.2. Cross-linking of SMC2/SMC4, condensin and cohesin complexesThe mixing ratio of BS3 to complexes (SMC2/SMC4, condensin, cohesin) was determined by using 1 mg protein aliquots and a 30-, 90-, 270-, 810- or 5-, 15-, 30-, 60-, 120- or 3-, 30-, 90fold weight excess (respectively) of BS3 cross-linker (Thermo Scientific) resuspended in DMSO at 300 mg ml21. After 2 h, the reaction was quenched by addition of ABC to 50 mM for 30 min. The products of cross-linking were separated on a NuPAGE 4?2 bis ris gel (Invitrogen) using MES running buffer and were Coomassie- or silver-stained. Either 36 mg of purified SMC2/SMC4 or 100 mg of condensin complex, at 0.05 mg ml21 in 50 mM HEPES buffer, 250 mM NaCl, 0.5 NP-40, 4 mM biotin, was cross-linked with 30-fold weight excess of BS3 for 2 h on ice. After 30 min quenching, the cross-linked complexes were separated in 4?2 bis ris gel (Invitrogen). Also 100 mg of cohesin complex at 0.02 mg ml21 was cross-linked in the same way.6.6. Mass spectrometryCross-linked peptides were analysed on LTQ-Orbitrap Velos (Thermo Scientific) on a 180 min or 240 min gradient, using CID collision energy at 35 and fragmenting the eight most intense peptide precursor ions with charge stages z ?3 or higher, per cycle. MS spectra were recorded at 100 000 resolution, and MS/MS spectra at 7500 resolution, both in the Orbitrap. When analysing scaffold samples, an inclusion list stating the m/z values of condensin and cohesin cross-linked peptides identified in the in vitro study was used to dictate the MS/MS analysis. First, the ions from the inclusion list were fragmented, and only if these were not detected were other peptides of z . 2 fragmented using dynamic exclusion.6.7. Database searchingThe MS/MS spectra peak lists were generated from the raw data files using the Quant module of MAXQUANT v. 1.0.11.2 [90] at default parameters, except for choosing 200 as `top MS/MS peaks per 100 Da’. Cross-linked peptide spectra were searched using the software package Xi (ERI, Edinburgh) against Gallus gallus condensin and cohesin sequences uploaded from SwissProt or from the chicken IPI database (v. 3.49) modified as described for analysis of chicken mitotic chromosomal proteins [59]. Search parameters: MS tolerance 6 ppm, MS/MS tolerance 20 ppm, fixed modification carbamidomethyl on cysteine, variable modifications: oxidation (Met), DST/BS3OH (Lys), DST/BS3-NH2 (Lys), the `Max. missed cleavages’ was set to 4. Matched spectra and cross-linked peptide candidates were returned by Xi in.

Share this post on: